How Do I Install My Gaskets?

For most models replacing your gaskets is straightforward, but we've created a few videos to help.

T910-00075 Gaskets

These gaskets are only made for one channel shape, the same shape as the gasket. The installation instructions for this gasket are the same as the T910-00159, shown below.

See this page: Fix Your Vacuum Sealer with OutOfAir's T910-00075 Replacement Gasket

T910-00159 Gaskets

These gaskets fit in 3 different channel shapes. When you receive them, the shape of the gaskets will not match the shape of the gasket channel on your machine - that's ok. The video below shows how to install them. If you'd rather read though here is the gist of it:

1. Install the two ends of the gasket first.
2. Push the middle into place.
3. Work your way along the gasket slowly working the gasket into the channel.

More details here: Fix Your Vacuum Sealer with OutOfAir's T910-00159 Replacement Gasket

176870-000-000 Gaskets

The video below shows how to install them. If you'd rather read though here is the gist of it:

1. Install the two ends of the gasket first 
2. Push the middle into place.
3. Work your way along the gasket slowly working the gasket into the channel.

More details here: Fix Your Vacuum Sealer with OutOfAir's 176870-000-000 Replacement Gasket